Power Tools

• Low oil alert
• Includes 12V set of charging cables
• Powered by MacGen
• AVR and electric start

Jefferson generators offer a reliable backup power source when you need power where it is not readily available or if there is an outage. The Jefferson petrol JEFGENPET30 generator is powered by MacGen Power Generation engine and comes complete in steel tubular frame for heavy duty protection.

The Dewalt DCH273P2 SDS Hammer Drill features class-leading high speed drilling performance, at over 90 holes per charge when used with a 5.0Ah battery. Featuring rotation stop mode, allows the cordless SDS-Plus drill to perform light chiselling tasks, in addition to an LED light to illuminate the work piece. The DCH273P2 is compact, lightweight and has a tough design accompanied by market leading batteries and a brushless motor make this a truly incredible tool.

FEATURES AND BENEFITS
• DCH273 Brushless XR SDS Plus 3-Mode Hammer fitted with electronic clutch for consistently high torque.
• Modes: Rotary, SDS Hammer, Chisel Only
• No Load Speed: 0-1,100/min.
• Impact Rate: 0-4,600/bpm
DIMENSIONS
Product Width 298.00 mm
Product Length 490.00 mm
Product Height / Depth 110.00 mm
Product Weight 5.76 kg

DeWalt 18V XR Brushless Combi Hammer Drill with 5Ah Li-ion Battery, 4Ah Li-ion Battery and Charger. Ultra-compact and lightweight in construction, the DCD796 Combi Drill is easy to use and manoeuvre in tight spaces. The 15-position adjustable torque provides consistent screwdriving into a range of materials, while the two-speed all-metal transmission allows for extended tool life and increased runtime.

The DCF887 delivers 205Nm of torque, up to 3,250rpm and 3,800 impacts per minute. With 3 speed on torque modes, you can exercise complete control over countless fastening applications. Bare unit, batteries and charger sold separately.

Additional features
• 135 mm in length: allowing you to get into even smaller spaces
• 0.9 kg: (tool only) for ultimate portability
• Drop and load' bit holder: for one-handed operation
• 3x led ring: for excellent workpiece lighting
• Application control is achieved through 3 motor speeds and torque settings including precisiondrive
• Precisiondrive mode offers additional control in screwdriving applications to avoid material and fastener damage
Includes
• (1) magnetic bit holder
• (1) belt hook

The cordless solution for professionals working on general purpose cutting and ripping applications. Part of the DEWALT 18V XR range, the DCS570 has a brushless motor, a no load speed of 5,500rpm, a maximum cut depth of 65mm, and variable bevel angle adjustment. Bare unit, batteries and charger sold separately.
Additional Features
• Scale for precise cutting depth setting to 64 mm
• Optimum balance for safe, fatigue-free operation
• Stable block construction for low vibration running and long service life
• Additional handle for safe two-handed work
• Direct compatibility with DEWALT AirLock system for easy, secure connection to extraction hose
• Dust blower clears dust and debris from cut line
• LED work light for improved cut line visibility
Includes
• (1) Blade Spanner
• (1) Dust Extraction Spout
• (1) Rip Fence
• (1) Precision 24 Tooth Saw Blade

The upgrade from the DCS331 model with an improved brushless motor for increased runtime and performance. Top handle features a trigger with separate lock-off switch and easy access speed control wheel. Improved tool-free blade change mechanism holds the blade more securely and keeps the blade squarer during use.

– Brushless Planer 18 Volt Bare Unit
– brushless motor that provides a smooth planing
– Lightweight, compact and ergonomic design for comfort
– twin blade drum is fitted with TCT blades for high quality
– On-board blade storage and Torx key
– Supplied with: 2 x Tungsten Carbide Tipped Reversible Blades
– 1 x Hex Wrench, 1 x Torx Key, 1 x Guide Fence and 1 x Blade Alignment Plate

Powerful jigsaw with keyless blade change, anti-scratch base cover and rubber-coated grip. Supplied with dust port. Compatible with DeWalt XR Li-ion batteries.

3-Stage Pendulum Action
Single-Speed Variable
Tool-Free Blade Change
Dust Blower Facility
Die-Cast Aluminium Base
All-Metal Gearing
Lock-Off Switch
Rubber-Coated Grip
Without Work Light
Does Not Include Battery or Charger

The 18V XR Brushlesss 1/4 sheet sander provides users with the power and runtime needed to get the job done. A variable, seven-speed dial offers speed control from 8000 – 13500 OPM, allowing users to match the sander’s speed to their application. To aid in dust collection, the sander features a one-handed locking dust bag that attaches securely to the sander through its AIRLOCK™-compatible dust port. Alternatively, the user can attach the sander directly to the DCV586M dust collector.
Additional features
• Hook & loop platen: quick change and secure hold of sanding disc
• Paper clamps: provided for conventional abrasives
• Dual plane counter-balance: low-vibration design reduces user fatigue
• Overmould top and body grip: provides ultimate comfort and control during use
• Dust sealed on/off switch: for increased durability
• Sealed 100% ball-bearing construction: provides longer life
• Direct compatibility with airlock system: ensuring easy and secure connection with dewalt dust extractors for high dust-extraction efficiency and increased user health protection
• Part of the cordless 18v xr system: fully compatible with 250+ solutions.

DeWALT DCR020 DAB Digital Radio 240V & Li-ion Bare Unit DCR020-GB
The DEWALT DCR020 Digital Radio is a compact and robust DAB(+)/FM jobsite radio and can be powered by mains or by DEWALT 10.8-18 Volt XR Li-ion batteries. The Tech Box, on-board storage protects portable audio devices and is fitted with a 3.5mm auxiliary port and a USB port that allows devices to be charged (USB charging AC only). The radio has an integral roll cage that provides impact resistance for maximum durability and a 1.8m powercord with wrap-around storage.

PLEASE NOTE: This unit is a radio only and NOT suitable for charging batteries.

Bare Unit, No Battery Supplied.

Specification

Radio Range: DAB(+)/FM.
Input Power: Battery: 10.8-18v Li-ion, DC: 230/240v.
Length: 240mm.
Height: 245mm.
Weight: 2.8kg.

Features:
• Steel cut spiral bevel gears provide highest level of durability and low vibration, increasing user productivity
• Low profile jam pot gear case improves gear durability and ergonomics
• Intelligent trigger & lock-off switch for enhanced work safety & control
• Keyless guard for enhanced application versatility
• Two position side handle offers greater comfort and control
• Quick change wheel release allows quick and easy wheel removal
Please note – this is a body only item and does not include a battery or charger.

Comes with:
• 2 position side handle
• Keyless protective guard
• Allen Key

The DCD796N powerful 2 speed brushless motor delivers over 50% more run -time than predecessors. This drill model is a 2nd generation hammer drill. The DCD796N compact hammer drill gives traders a full range of flexibility and control. It features a compact design measuring 190mm and weighing 1.7Kgs. Perfect for drilling and working in small hard to reach areas. A high speed gear / transmission system with two speed settings tackles jobs with precision and efficiency. Integrated 3 mode LED light illuminates the working area. Integrated spotlight mode.


Additional features
• Bright led on tool foot: for high visibility in low light situations
• Ultra compact, lightweight design: allows use in confined spaces
• Two speed all metal transmission: for increased runtime and longer tool life
• Intelligent trigger design allows for total control of application
• New 3 position led torch, high/medium/low settings with high output 20min led delay lighting up your work place
• Improved ergonomic design with rubber grip over mould improving users comfort
• Li-ion battery packs allows for superior insertion and removal with state of charge indicator
• Steel belt hook and magnetic bit holder ensures strong storage solutions
• Part of the intelligent xr lithium ion series designed for efficiency and making applications faster
• Multi voltage charger for use with 18v, 14.4v and 10.8v xr li-ion battery packs
Includes:
1 x Dewalt DCD796N Combination Hammer Drill

DeWALT DCL040 XR LED Torch 18V Bare Unit DCL040-XJ
The DEWALT DCL040 is the latest generation 18 Volt Work Light, using LED Technology and featuring new XR Li-ion technology. It has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip increase comfort.

The LED Bulb producing 110 Lumen output (10,000Hr Life) with a 2 zone light pattern with the flashlight head pivots more than 90 degrees vertically with ratchet lock. The Flashlight includes an integrated hook for hanging and can be used free standing, with belt clip.

PLEASE NOTE: 18 Volt Battery and charger sold separately

Specification

Bulb Type: LED.
Height: 240mm.
Length: 115mm.
Weight: 260g.

This Hikoki G12STX 600W 115mm Grinder is built using high quality materials including a glass reinforced polyamide resin body and die-cast aluminum gear casing, the G12STX offers performance and durability. Weighing in at just 1.4kg and measuring only 254mm (10 in) long, the G12STX allows for optimal control while providing a high power to weight ratio. With a 580W motor, the G12STX is perfect for the grinding of metal or masonry, paint and rust removal, or sanding. With a low profile head and compact body, the G12STX gets into the tightest corners, while a small grip perimeter and forward canted side handle add comfort and reduce user fatigue.

G12STX Features:
• 115mm angle grinder
• High overload durability
• 0V restart protection
• Soft start
• Optimised air flow and efficient cooling
• Small grip circumference for user comfort
• Abrasive wheel not included

115mm angle grinder

High overload durability

0V restart protection

Soft start

Optimised air flow and efficient cooling

Small grip circumference for user comfort

Abrasive wheel not included