Equip yourself with reliable and durable hand tools, power tools, and accessories for various projects, ensuring precision, efficiency, and quality for DIY enthusiasts and professionals alike.
Jefferson generators offer a reliable backup power source when you need power where it is not readily available or if there is an outage. The Jefferson petrol JEFGENPET30 generator is powered by MacGen Power Generation engine and comes complete in steel tubular frame for heavy duty protection.
The Dewalt DCH273P2 SDS Hammer Drill features class-leading high speed drilling performance, at over 90 holes per charge when used with a 5.0Ah battery. Featuring rotation stop mode, allows the cordless SDS-Plus drill to perform light chiselling tasks, in addition to an LED light to illuminate the work piece. The DCH273P2 is compact, lightweight and has a tough design accompanied by market leading batteries and a brushless motor make this a truly incredible tool.
FEATURES AND BENEFITS • DCH273 Brushless XR SDS Plus 3-Mode Hammer fitted with electronic clutch for consistently high torque. • Modes: Rotary, SDS Hammer, Chisel Only • No Load Speed: 0-1,100/min. • Impact Rate: 0-4,600/bpm DIMENSIONS Product Width 298.00 mm Product Length 490.00 mm Product Height / Depth 110.00 mm Product Weight 5.76 kg
The Polar Extra Wooden Loft Ladder has a 60mm insulated hatch door providing a U-Value of 0.645 W/m²K. It also has a distinctive 27mm thick strong wooden frame. These excellent characteristics contribute to a more energy efficient home. The Polar Extra ladder comes fully assembled and equipped with steel safety hand rail and stair shoes.
600 mm insulated hatch door U-Value of 0.645 W/m²K 27mm thick solid wooden frame H: 2800mm W: 600mm D: mm
The DCF887 delivers 205Nm of torque, up to 3,250rpm and 3,800 impacts per minute. With 3 speed on torque modes, you can exercise complete control over countless fastening applications. Bare unit, batteries and charger sold separately.
Additional features • 135 mm in length: allowing you to get into even smaller spaces • 0.9 kg: (tool only) for ultimate portability • Drop and load' bit holder: for one-handed operation • 3x led ring: for excellent workpiece lighting • Application control is achieved through 3 motor speeds and torque settings including precisiondrive • Precisiondrive mode offers additional control in screwdriving applications to avoid material and fastener damage Includes • (1) magnetic bit holder • (1) belt hook
The cordless solution for professionals working on general purpose cutting and ripping applications. Part of the DEWALT 18V XR range, the DCS570 has a brushless motor, a no load speed of 5,500rpm, a maximum cut depth of 65mm, and variable bevel angle adjustment. Bare unit, batteries and charger sold separately. Additional Features • Scale for precise cutting depth setting to 64 mm • Optimum balance for safe, fatigue-free operation • Stable block construction for low vibration running and long service life • Additional handle for safe two-handed work • Direct compatibility with DEWALT AirLock system for easy, secure connection to extraction hose • Dust blower clears dust and debris from cut line • LED work light for improved cut line visibility Includes • (1) Blade Spanner • (1) Dust Extraction Spout • (1) Rip Fence • (1) Precision 24 Tooth Saw Blade
The upgrade from the DCS331 model with an improved brushless motor for increased runtime and performance. Top handle features a trigger with separate lock-off switch and easy access speed control wheel. Improved tool-free blade change mechanism holds the blade more securely and keeps the blade squarer during use.
– Brushless Planer 18 Volt Bare Unit – brushless motor that provides a smooth planing – Lightweight, compact and ergonomic design for comfort – twin blade drum is fitted with TCT blades for high quality – On-board blade storage and Torx key – Supplied with: 2 x Tungsten Carbide Tipped Reversible Blades – 1 x Hex Wrench, 1 x Torx Key, 1 x Guide Fence and 1 x Blade Alignment Plate
Powerful jigsaw with keyless blade change, anti-scratch base cover and rubber-coated grip. Supplied with dust port. Compatible with DeWalt XR Li-ion batteries.
3-Stage Pendulum Action Single-Speed Variable Tool-Free Blade Change Dust Blower Facility Die-Cast Aluminium Base All-Metal Gearing Lock-Off Switch Rubber-Coated Grip Without Work Light Does Not Include Battery or Charger
The 18V XR Brushlesss 1/4 sheet sander provides users with the power and runtime needed to get the job done. A variable, seven-speed dial offers speed control from 8000 – 13500 OPM, allowing users to match the sander’s speed to their application. To aid in dust collection, the sander features a one-handed locking dust bag that attaches securely to the sander through its AIRLOCK™-compatible dust port. Alternatively, the user can attach the sander directly to the DCV586M dust collector. Additional features • Hook & loop platen: quick change and secure hold of sanding disc • Paper clamps: provided for conventional abrasives • Dual plane counter-balance: low-vibration design reduces user fatigue • Overmould top and body grip: provides ultimate comfort and control during use • Dust sealed on/off switch: for increased durability • Sealed 100% ball-bearing construction: provides longer life • Direct compatibility with airlock system: ensuring easy and secure connection with dewalt dust extractors for high dust-extraction efficiency and increased user health protection • Part of the cordless 18v xr system: fully compatible with 250+ solutions.
Features: • Steel cut spiral bevel gears provide highest level of durability and low vibration, increasing user productivity • Low profile jam pot gear case improves gear durability and ergonomics • Intelligent trigger & lock-off switch for enhanced work safety & control • Keyless guard for enhanced application versatility • Two position side handle offers greater comfort and control • Quick change wheel release allows quick and easy wheel removal Please note – this is a body only item and does not include a battery or charger.
Comes with: • 2 position side handle • Keyless protective guard • Allen Key
The DCD796N powerful 2 speed brushless motor delivers over 50% more run -time than predecessors. This drill model is a 2nd generation hammer drill. The DCD796N compact hammer drill gives traders a full range of flexibility and control. It features a compact design measuring 190mm and weighing 1.7Kgs. Perfect for drilling and working in small hard to reach areas. A high speed gear / transmission system with two speed settings tackles jobs with precision and efficiency. Integrated 3 mode LED light illuminates the working area. Integrated spotlight mode.
Additional features • Bright led on tool foot: for high visibility in low light situations • Ultra compact, lightweight design: allows use in confined spaces • Two speed all metal transmission: for increased runtime and longer tool life • Intelligent trigger design allows for total control of application • New 3 position led torch, high/medium/low settings with high output 20min led delay lighting up your work place • Improved ergonomic design with rubber grip over mould improving users comfort • Li-ion battery packs allows for superior insertion and removal with state of charge indicator • Steel belt hook and magnetic bit holder ensures strong storage solutions • Part of the intelligent xr lithium ion series designed for efficiency and making applications faster • Multi voltage charger for use with 18v, 14.4v and 10.8v xr li-ion battery packs Includes: 1 x Dewalt DCD796N Combination Hammer Drill
DeWALT DCL040 XR LED Torch 18V Bare Unit DCL040-XJ The DEWALT DCL040 is the latest generation 18 Volt Work Light, using LED Technology and featuring new XR Li-ion technology. It has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip increase comfort.
The LED Bulb producing 110 Lumen output (10,000Hr Life) with a 2 zone light pattern with the flashlight head pivots more than 90 degrees vertically with ratchet lock. The Flashlight includes an integrated hook for hanging and can be used free standing, with belt clip.
PLEASE NOTE: 18 Volt Battery and charger sold separately
This Hikoki G12STX 600W 115mm Grinder is built using high quality materials including a glass reinforced polyamide resin body and die-cast aluminum gear casing, the G12STX offers performance and durability. Weighing in at just 1.4kg and measuring only 254mm (10 in) long, the G12STX allows for optimal control while providing a high power to weight ratio. With a 580W motor, the G12STX is perfect for the grinding of metal or masonry, paint and rust removal, or sanding. With a low profile head and compact body, the G12STX gets into the tightest corners, while a small grip perimeter and forward canted side handle add comfort and reduce user fatigue.
G12STX Features: • 115mm angle grinder • High overload durability • 0V restart protection • Soft start • Optimised air flow and efficient cooling • Small grip circumference for user comfort • Abrasive wheel not included
• 4 nose pieces & wrench store in handle for versatility and convenient storage • Accepts aluminium and steel rivets for wide range of applications • Easy use spring loaded handle ejects rivet stem
This Stanley Fatmax measuring tape offers a 3.35m standout making it ideal for one person measuring. A wide 32mm blade makes reading the numbers easy. The mylar-coated blade is up to 10 times more resistant to abrasion than a normal lacquered blade. Featuring Blade Armor coating on the first 100mm, which reduces the risk of breaking the tape by 95%. The specially designed hook grabs on-site, top and bottom for versatility. A cushion grip provides a sturdy, slip-resistant hold.
Benefits • Mylar coated blade for up to 10 times more resistance • Blade Armor coating on first 100mm • Cushion grip improves user control
FatMax® 30 metre chalk line with an ABS case with a 45g capacity. A clutch allows line extension without handle rotation and a 3.5:1 gear ratio allows for a fast rewind. Included in the set are a blue 113g chalk refill and a fine tip black marker.
FATMAX® T16 Multi-Tool, compact multi-tool with soft ergonomic handle for a better grip. Features: • Black oxide tools • Ergonomic soft grip handle for comfort • Durable and tough body to withstand extreme use
Extreme Framing Blade 190mm x 30mm 24 Tooth designed for use with corded machines. Premium Grade Carbide for longer life and durability. Ultra sharp carbide teeth reduces splintering.
Precision ground tip with optimised face shear and face grind for fast, accurate cutting. Body slots help to dampen vibration improving cutting feel and performance while reducing noise.
Ultra thin kerf design for smooth cuts with reduced cutting force, the anti-kickback design reinforces the carbide tip for impact resistance.
Suitable for cutting a range of materials including Hard and Soft woods, Plywood, Melamine, MDF.
Bostik Maxi Sealant Gun is a universal joint and glue chair that fits cartridges up to 300 ml. The cradle of the joint gun ensures that the cartridge is held in place and is at the same time rotatable so that the joint tip has the right angle in relation to the surface. Optimised to work with different types of adhesives and sealants with light compressive force.
Bostik Maxi Sealant Gun has an anti-drip function - the flow of glue or joint stops immediately when you release the handle. Anti-drip function increases precision and reduces product spillage.